Home  |  Products & industries  |  Products  |  Filters and filter systems  |  Fine filters  |  GENO® fine filter FM
Back to overview

GENO® fine filter FM – for trade and industry

The GENO® fine filter FM (DN 150-DN 200) protects water installations in trade and industry. It is plastic-coated on the interior and exterior. The protective filter contains several filter elements, which are easy to replace. The basic equipment includes filter elements with 80 µm (0.08 mm); 50 µm, 100 µm and 500 µm can also be retrofitted. With the raw and pure water pressure gauge, the pressure remains under control.

  • DN 150, 200
  • Max. water temperature 30°C
  • Nominal pressure PN 10 bar
  • Basic equipment filter elements 80 μm
  • 50 μm, 100 μm and 500 μm can be retrofitted

Installation requirements

Please note local installation directives, general guidelines and technical specifications. The installation site must be frost-proof. Furthermore, a drain connection (floor drain) should be available. The filters should be installed in pipes of the same dimensions as the nominal diameters of the filters. Components mounted above the intended installation site of the filter must be installed at a sufficient distance in order to ensure the trouble-free replacement of the filters. In cases where the water supply must be maintained during the replacement of the filter element, either a filter with a lower flow rate must be installed in the bypass pipe or you are advised to switch 2 GENO® fine filters FM (each covering 50% of the max. flow capacity) in parallel.

Scope of supply

  • GENO® fine filter FME with two pressure gauges
  • Aeration and deaeration as well as draining valve
  • Counter flanges, screws and seals are not included in the scope of supply

Accessories

  • Differential pressure switch: with electric contactor (switching point 0.16 – 1.6 bar), continuously adjustable for visual and acoustic remote signal
  • Connector extension set for FM 150 - FM 200
  • 2 replacement filter elements (80 µm), set for FM 150 
  • 2 replacement filter elements (500 µm), set for FM 150 
  • 28 replacement filter elements (50 µm), set for FM 200
  • 14 replacement filter elements (100 µm), set for FM 200
  • 14 replacement filter elements (500 µm), set for FM 200
  • 2 replacement seals for stainless steel filter elements

For further technical specifications and details, see the product data sheet, which is available to download.