Sub-flow filter GENO®-VARIO 3000 - consistently good circulation water

Sub-flow filter GENO®-VARIO 3000 continuously improves the circulation water of closed hot and cold networks. To compensate for lost water volumes (minor leaks, repair measures), GENO®-VARIO 3000 adds treated raw water to the circuit. For water treatment, the sand filter stage first removes all non-soluble elements such as scale, rust or dirt particles. The connected ion exchange system then performs complete softening. As a result, a water quality in line with the applicable guidelines VDI 2035 and AGFW 510 (VdTÜV 1466) can be achieved without a change to the system content. It is actuated manually via the fully automated control electronics.

Please note local installation directives, general guidelines and technical specifications. The installation site must be frost-proof and the sub-flow filter protected against chemicals, dyes, solvents and vapours. If there are large amounts of course dirt, a course dirt filter must be installed upstream to protect the pump. The ambient temperature as well as the radiation temperature next to the system must not exceed 40 °C. A socket (230 V / 50 Hz) is required within a range of approx. 3 m of the system.

• Ready-to-connect sub-flow filter with filter material and ion exchange resin

• Optional module for make-up water feed for sub-flow filter GENO®-Vario 3000
• Dosing system for targeted increase of the pH value to the optimum value of 9.3 
• Regeneration salt in acc. with EN 973 type A, 25 kg sack

For further information on installation requirements and accessories, as well as technical details, see the product data sheet, which is available to download.